ELECBRAKES BLUETOOTH ELECTRIC BRAKE CONTROLLER
Elecbrakes is a trailer mounted proportional trailer brake controller, wired directly into the trailers electrical circuit. Elecbrakes draws power from the taillight circuit as well as the brake light circuit ensuring sufficient power is available for up to two braked axles.
Braking is triggered by positive voltage being applied to the brake light circuit. Once braking is triggered Elecbrakes uses Microprocessors and Accelerometers to calculate and provide precise brake response
Elecbrakes connects wirelessly to the in-car remote control and the user's smartphone. This enables intuitive adjustments while driving as well as access to a manual override. The smartphone app allows the user to set brake responses according to trailer load or driving conditions by calibrating five preset programs.
All of the preset programs are stored within the device on the trailer, ensuring any user can download their own copy of the smartphone app and will still have access to the Elecbrakes' preconfigured settings.
ELECTRIC BRAKE CONTROLLER FEATURES
TRAILER MOUNTED BRAKE CONTROLLER
Elecbrakes is a trailer mounted solution that allows flexibility to tow your trailer with any capable tow vehicle. Mounting to the draw bar and wiring into the trailer's loom, the Elecbrakes unit is powered via the trailer's electrical plug which is connected to the tow vehicle. Operating on both 12 and 24-volt systems, Elecbrakes is smart brake control technology.
PRESET BRAKING PROGRAMS
A core advantage in the Elecbrakes system is the five independent braking programs. The programs are displayed in the app settings page and can be set to suit load variation or a change in driving conditions. These settings are then stored so that every time the operator connects the trailer, they simply select the program relevant to load and are ready to go.
IN-CAR BREAK CONTROLLER REMOTE
Elecbrakes can be adjusted using the specially designed remote-control unit. Connecting by the best in Bluetooth 4.0 technology, the remote provides a multi-faceted in-car controller. With a friendly interface the operator can apply the manual override, and, via the plus and minus buttons, increase and decrease brake response instantly on the trailers brakes.
PLUG-N-PLAY, READY IN 10 MINUTES
As well as out standard hard-wired option, Elecbrakes also comes in a 'Plug & Play' variety that gets you ready to go with a fully featured proportional electric brake controller installed on your trailer within 10 minutes. This version of Elecbrakes (ELBC2000 P1.5) comes with a user specified adapter. available in all common combinations using flat 7 and 12 sockets and plugs and well as 7 pin round small and large combinations.
Elecbrakes can be powered entirely by standard trailer wiring, with the option of connecting an auxiliary power source for compatibility with tri-axle trailers. Elecbrakes is Australian owned, designed and manufactured. Great for camper trailers.
MORE INFORMATION ELECBRAKES
"*" indicates required fields